Safety operating procedures for cold heading machine
Source：http://www.pbnxw.com.cn Author：冷鐓機(jī) Time：2014/8/16 Click：
Safety operating procedures for cold heading machine
1. It is prohibited to operate the cold heading machine while wearing gloves.
2. Before driving, it is necessary to carefully check whether all fasteners of the equipment are locked and whether the safety protection devices are intact. Regular inspections should be carried out during work to prevent loosening due to severe vibration and accidents.
After adjusting the equipment, first turn the flywheel to check if all mechanisms are working properly. After removing the lever used for turning the car, start the motor. It is strictly prohibited to start the motor while turning the car.
4. Before driving, all faults should be eliminated and a short time rotation should be performed before starting the forging test.
During the operation of the equipment, operators should stand in a safe position and are strictly prohibited from picking up workpieces at the concave convex mold. They can only view the product at the bottom.
When replacing the product, it is necessary to carefully adjust the mold and punch, and carefully inspect whether each component is normal.
7. In the production process, if a malfunction occurs, it must be stopped immediately, the cause must be identified, and hidden dangers must be eliminated. Do not drive when the brakes fail.
8. The safety board (safety pole) must be equipped with protective devices to prevent accidents caused by breakage. All protective devices must not be dismantled or lost at will.
- 上一篇：Cold heading _ Introduction to 2014/8/16
- 下一篇：What are the common models of 2014/8/16
