How to safely operate a multi station high-speed automatic cold heading machine
Source：http://www.pbnxw.com.cn Author：多工位冷鐓機 Time：2014/8/19 Click：
Safe operation steps for multi station high-speed automatic cold heading machine
The ZS308 multi station high-speed automatic cold heading machine is an efficient automatic equipment used for manufacturing screws. The forging station of this machine tool is arranged horizontally. Using cold drawn coil material through processes such as cutting, initial punching, precision punching, and wire rolling. Continuously manufacture finished screw products.
At present, there are generally three sources of fastener equipment: imported from Europe, America, and Japan, imported from Taiwan, and produced in mainland China. As is well known, the prices of imported equipment are very high, and many fastener manufacturers still choose mainland cold heading machines with relatively low prices and good quality. Cold heading machine equipment manufacturers have good development in many parts of China, mainly due to the huge demand in the country! At present, the quality of cold heading machine manufacturers in mainland China is uneven, and their main competitive advantage is the price war, which is actually no less than drinking poison to quench thirst.
Safety operating procedures for cold heading machine
1. Do not operate the cold heading machine with gloves.
2. Before driving, it is necessary to carefully check whether all fasteners of the equipment are locked and whether the safety protection devices are intact. Regular inspections should be carried out during work to prevent loosening due to severe vibration and accidents.
3. After adjusting the equipment, first turn the flywheel to check if all mechanisms are working properly. After removing the lever used for turning the car, start the motor. It is strictly prohibited to start the motor while turning the car.
4. Before driving, all faults should be eliminated and a short time rotation should be performed before starting the forging test.
5. During the operation of the equipment, operators should stand in a safe position and are strictly prohibited from picking up workpieces at the concave convex mold. They can only view the product at the bottom.
6. When replacing the product, it is necessary to carefully adjust the mold and punch, and carefully inspect whether each component is normal.
7. In the production process, if a malfunction occurs, it must be stopped immediately, the cause must be identified, and hidden dangers must be eliminated. Do not drive when the brakes fail.
8. The safety board (safety pole) must be equipped with protective devices to prevent accidents caused by breakage. All protective devices must not be dismantled or lost at will.
- 上一篇：The difference between cold he 2014/8/19
- 下一篇：What is cold heading machine s 2014/8/19
